Aged to Perfection

With the coming of Spring (we all hope) comes for me a lot of birthdays. So, I decided I better get a jump start on some of the cards I am going to need. I recently heard of a sunburst or starburst card and of course I had to give it a try. I started with 4 different pieces of patterned paper cut 1 1/2" X 4". Take each strip and cut it diagonally corner to corner to form two triangles. Lay your triangles out point side down and decide on the pattern you want. Next, cut a piece of scrap card stock 2 3/4" X 5".  First thing to do is to find the center of the paper along the 5" side. I drew a line from top to bottom to mark my center. Next I covered the entire piece of card stock with some Glue n Seal. Starting from the center of your card stock you start applying your triangle pieces being sure to let the hang off of each end of the paper a bit and be sure you are covering the entire piece of card stock. You may have to adjust your placement to be sure the corners are covered. One done allow it to dry and the cut all the overhanging excess paper off. Next I adhered the entire panel to another piece of white card stock cut at 3 3/4" 5". And, Joy of Joy's I got to try out my new mini perfect layers when I cut my black mat. I used the 1/8" side and it was fast an easy to get a perfectly centered mat behind my image layer. I also added a 1/2" x 5" piece of black card stock to the front of my card. I then cut a butterfly out at 2 3/4" using my Cameo and some green and black card stock. Before adhering the layers together I decided I wanted to glitter my butterfly. I pressed the black layer of the butterfly into my Versamark embossing pad and sprinkled it with some Ranger Sticky Embossing powder. I think everyone should have some of this embossing powder it is awesome, because, when you heat it up it goes from the white powder to shiny and becomes sticky. I then sprinkled the layer with some of the Black Soot Distress Glitter and then briefly heated the whole thing again to make sure the glitter was permanently adhered. It was quick and easy with the Sticky Embossing powder and I don't have glitter falling off my project. If you would like some of the Sticky Embossing powder shoot Kim and email and she can special order for you. It is so worth it. The Distress Glitters are also a special order item and they are all gorgeous. Some of the prettiest glitter I've seen. Once I had the butterfly done, I adhere the two layers together with some Scotch Quick Dry Adhesive. I adhered the butterfly to my card front with some of the Clear 3D foam pads.  I stamped my sentiment with some Memento Tuxedo Black Ink and added some bling to finish it off. Thanks for visiting. I hope you will get in touch with Kim to get your Sticky Embossing powdered ordered. You won't regret it!